原文：
           Bielomatik在引进了一种新型快捷阀之后对 球阀其双道MQL（minimal quantity lubrication最小量润滑油）系统的设计进行了进一步的改进，这种快捷阀能够精确地控制石油到达切断点的温度。通过蝶阀将油加热到一种持续的可明了的温度，Bielomatik移除了其中一个可变的程序，以使得整个过程更加有活力。 Bielomatik双道系统将机械压力的油和比例适当的闸阀可控制空气分别运截止阀至Bielomatik旋转运输装置。一个有特殊设计的安装在旋转传输装置的快捷阀可以精确控制所需的润滑油量。此快捷阀配置有加热器和反应传感器，止回阀以精确控制油的温度。空气和油将会单独流动，一直到他们到达切削刀片被理解卸流之前，在这时他们会混合产生可控制的纯的气油混合体。

“ Germany Bielomatik precise control of the introduction of fast valve oil temperature ”是由中国球阀网提供的阀门行业新闻，译文仅供参考。另外，中国球阀网还提供相关产品搜索： 气动管路球阀（仪表球阀）、 PP-R球阀、 铜球阀、 广式（西德式）球阀、 陶瓷球阀 等。

译文：
              Bielomatik the introduction of a new type of fast dual-channel valve after it MQL (minimal quantity lubrication minimum quantity lubrication) system design has been further improved, this fast valve Filterto precisely control the temperature of the oil to Dace breakpoint. Through the oil heated to a constant temperature can be clear, Bielomatik Forged Steel Valvesremoved one of the variable process to make the process more dynamic. Bielomatik dual-channel system of mechanical oil pressure and proportion appropriate to control the air were transported to Bielomatik spin transport device. A specially designed transmissionBellow Seal Valves vequipment installed in the fast rotating valve can precisely control the amount of lubricant required. This fast response valve is equipped with heaters and sensors to precisely control the temperatureNeedle Valves of the oil. Flow of air and oil will separate until they reach the cutting blade to be understood before discharge flow is at this moment they can control the mixing of pure gas oil mixture.

原文来源：http://www.1qiufa.com/

2010-08-31 08:55

返回